Return to Overview

This mode erases the shadows that appear on copies from binding holes on originals.

• Do not place originals with binding holes into the feeder, as this may damage the originals.

• The borders you do not select are attenuated when using this function.

• You must place an original on the platen glass when using this function.

1. Set an original on the platen glass.

For details, see "Placing Originals."

2. Press (Main Menu).

3. Use [], [] or (Scroll Wheel) to select <Copy>, then press [OK].

4. Use [], [] or (Scroll Wheel) to display <Shadow/Frame Erase Settings>, then press [OK].

5. Use [], [] or (Scroll Wheel) to select <Binding Erase>, then press [OK].

6. Use [], [] or (Scroll Wheel) to select the original size, then press [OK].

• To switch to the inch sizes, press the left Any key to select <Inch Size>.

7. Use [], [] or (Scroll Wheel) to select the hole punch location, then press [OK].

8. Use [], [], (Scroll Wheel), and - (numeric keys) to enter a frame erase width, then press [OK].

• The default settings are <18 mm> for <Left> and <4 mm> for <Top>, <Right>, and <Bottom>. The maximum original frame erase width that you can set is <20 mm>.

• If you want to change the value, press (Clear) before entering the new value.

• If you enter a value outside the setting range, a message prompting you to enter an appropriate value appears on the screen.

9. Use - (numeric keys) to enter the desired copy quantity (1 to 99).

10. Press (Start).

If you want to copy multiple originals using the platen glass, set an original and press (Start) once for each page.

11. Press (Main Menu) to return to the Main Menu screen.

• Back To Top